Introduction of Quartz Stone

Quartz stone are in a vacuum under the conditions of natural quartz crystal mine manufactured large-sizes, is a new type of high-grade environment-friendly decorative surfaces to replace natural and traditional man-made stone, are widely used in various aspects of the decoration. Quartz-stone up to 93% of natural quartz crystals as the main raw material, quartz crystal itself is crystal clear, bright, beautiful colors, luxurious, high hardness, non-deformation, non-discoloration, toughness and strong, non-radioactive, acid and other natural features. Would you be interested in itsion flow, well, here we go!

1, Quartz Stone raw materials selection

The engineers looking for high-quality quartz minerals and other additives, in the procurement at the same time, spare no effort to assists to enhance the quality and craftsmanship, strict demands on the quality, and continue to study a variety of new quartz mineral, to ensure compatibility with the annual quartz stone the development of new designs.

2, purification and mixing of quartz-stone raw materials

Particle size of a variety of quartz mineral by the purification device to remove impurities and pure, then deliver it into a giant mixing tower, step by step to the mineral and other additives evenly mixed. Does not contain impurities in the quartz stone material and uniform mixing, quartzs are the fundamental guarantee for defect-free.

3, Quartz stone will be thick molding

Ratio of materials and mixed well into the large-scale molding machine, the computer induction from fixed equipment on thick quartz embryo formation materials and precise adjust thickness, molding placed directly on belt conveyors, each only forming a sheet.

4, vacuum die casting

Quartz stone forming embryo material at die-casting machine with precisely controlled by a computer throughout the process, equipment will be the air gap of mineral row to close to vacuum, the formation of ore, slag, and other additives accumulation among the most closely by the experienced quality track and monitor the entire process control engineer. Each specification will be very large quartz slab for the vacuum die-casting material used to protect the dense and non-porous, plate-size the greater the process more complex.

5, Quartz stone surface polishing

At automated roller conveyor line quartz stone slab was slow-moving, through 30 group from the coarse-to-fine polishing head. Under high-speed rotation, combined with cooling water and many different abrasive, quartz stone surface has been polished into a special deal with shiny mirror effect. Nande quartz stone texture depth and texture the surface treatment which fully demonstrated.

6, Total Quality Detect

Polishing the surface of each piece to complete the deal with quartz slab, through the transmission lines will be entering the final quality control inspection of the surface brightness, pores or other types of defects for the whole of each inspection. Comprehensive quality inspection to eliminate defects in the quartz stone has left the Factory.

Recommendations for Quartz Tile Installation

Tile installation for quartzs can be a nightmare if you don't read the necessary recommendations. Why? Because quartzs have very low porosity, if you don't use the correct adhesive, one thing that can happen to your beautiful quartz tiles is several tiles popping up from the floor or wall. Engineered quartz tiles are made of 90-95% natural quartz and bonded together with polyester resin. As we all know, polyester contracts and dilates more than natural stone itself, therefore the whole tile installation for this type of material should have this in mind.

What most producers recommend, for tile installation is as follows:
1.    Clean the surface: where the tiles are going to be installed, make sure the area is free of cracks, stable, clean (without dust and other debris), smooth, guarantee the perfect setting for the tiles

2.    Preparing the Adhesive: make sure it's the proper adhesive, basically it should be a two component adhesive without water, or better uses latex liquid. The mix should follow this sequence: first the liquid latex component and second the powder component, don't switch this order.

3.    Spread an even flat layer of the adhesive on the tiling area, not thicker than 5 mm

4.    With the notched side of the trowel, comb the flat even layer of adhesive to help the tiles fit in perfectly and securely

5.    To get better results, you should also spread some adhesive on the back of the tile before laying it in place. Make sure you time these operations correctly, make sure the adhesive is not too dry ...

6.    Use rubber mallet to help adjust the tile when fitting it into place

7.    Use flexible cement based grout for the joint area